The Arizer Go (ArGo) Vaporizer in the AquaVape³ Set in *Carbon Black*

The Arizer Go (ArGo)  is the portable vaporizer that Arizer fans have been waiting for.

As with the Air 2 and Solo 2, the glass mouthpiece keeps the steam fresh and cool during each session. In addition, the borosilicate glass does not affect the taste of the herb like other materials.

The clear OLED screen and precise temperature control are just as much as the convenience of a replaceable 18650 battery.

Load the mouthpiece by dipping the end into your herb stock and gently tapping on it to loosen the herb for the air to pass through.
Place the herb-filled end in the Argo and push the top of the device down to expose the mouthpiece.
Switch on the device by simultaneously pressing the plus and the menu button.
Select the desired temperature with the plus and minus buttons.
The ArGo beeps twice as soon as the selected temperature is reached.
The ArGo has custom session settings so you have different options for each session. You can also set the temperature during steaming if you want more adjustments.

Rating:

• Technology: 8.2
• Steam quality: 8.5
• Materials: 8.2
• Manufacturing quality: 8.0
• Functionality: 8.2
• Flexibility: 8.0
• Handling: 8.4
• Mobility: 8.4
• Battery life: 8.6
• Overall rating: 8.2

 

AquaVape³ water filter with 14er-cut

This accessory is a must for anyone who wants to use our various vaporizers for added efficiency and performance. The water filter is made of the highest quality borosilicate glass and ensures that the steam is even cooler and therefore better for your neck and lungs.
 

What is the advantage of using a water filter with a vaporizer?

Since the steam is additionally filtered, it is cooled down immediately after production and freed from any final impurities. The steam is thus much cleaner and fresher and the inhalation is almost pollutant free.
The water filter can be used with the right adapter with many different vaporizers.
ATTENTION: Vaporizers are mostly electronic. Therefore, they must not come into contact with water. Please do not add too much water and do not keep the water filter at an angle, so that no water leaks! Before putting on the vaporizer, please check that the cut is dry and that no water can run into the vaporizer or heating chamber!
 

Improvements of the AquaVape³ compared to the AquaVape²:

• Two-piece with cap: easy filling and easier cleaning
• High quality and thick borosilicate glass
• Smaller, slimmer and better to handle
• Optimal amount of water is held and the perk slots are completely covered
• Nevertheless, no high splash of water ... the mouth stays dry
• Accurate 14mm cut (no wobbling)
   

AquaVape³ vaporizer waterfilter Details:

• Height: 125 mm
• Diameter: 30 mm
• water filtration
• a lot of percolators
• Borosilicate glass / glassware
• 14er inside cut (14.5 mm)

AquaVape³ vaporizer waterfilter scope of delivery:

1x AquaVape³ water filter made of laboratory glass 2 pieces (14er cut, female)

Please preheat the heating chamber before installing the adapter for the first time (stainless steel expands) to allow the adapter to fit. If the adapter does not fit in spite of preheating, please put it in the freezer compartment of your refrigerator for a few minutes (glass contracts in the cold).
 

Arizer ArGo AquaVape³ Set Details: